HP333DWAE / DWYE / DZK / DZ MAKITA 12V MAX CORDLESS HAMMER DRIVER DRILL 10MM (3/8'')


AVAILABLE OPTIONS
DWAE: 1x Standard Charger, 2x 2.0Ah Battery
DWYE: 1x Standard Charger, 2x 1.5Ah Battery
DZK : With Carrying Case, Without Charger & Battery
DZ: Without Charger, Battery & Carrying Case


FEATURES

• Compact and Ergonomic Design at Only 193 mm Long

• Ball bearing reduces bit wobbling

• Variable 2-speed (0-450 & 0-1,700 RPM) for a wide range of drilling, fastening and hammer drilling applications

• 0-25,500 IPM for fast hammer drilling in masonry materials

• Built-in LED light with pre-glow and afterglow functions illuminates the work area

• Convenient 10mm keyless chuck for quick bit changes

• 20 clutch settings and drill mode for added fastening control

• Reversing switch is conveniently located

SPECIFICATION
Capacity
Steel: 10 mm (3/8'')
Wood: 21 mm (13/16'')
Masonry: 8 mm (5/16'')
Impacts Per Minute (IPM) High: 0 - 25,500 | Low : 0 - 6,750
Max Fastening Torque Hard: 30 N·m (270 in.lbs) | Soft: 14 N·m (130 in.lbs.)
Max Lock Torque 28 N·m (250 in.lbs.)
No Load Speed (RPM) High: 0 - 1700 | Low: 0 - 450
Dimensions (L x W x H) 193 x 66 x 212 mm (7-5/8'' x 2-5/8'' x 8-3/8'')
Net Weight 1.1 - 1.3 kg (2.4 - 2.9 lbs.)
Work Amount (approx.) 350 holes with BL1021B
Auger Bit drilling Ø 9 mm, Melapi 30 mm thickness

STANDARD EQUIPMENT
Phillips Bit, Belt Clip



NOTE
* Items of standard equipment and specifications may vary by country or area.
Net weight and dimensions may differ depending on the type of battery(ies) used.
All pictures shown are for illustration purpose only. Continuous Usage Time/ Work Amount: Actual performance may vary based on application.



WARRANTY
Every Makita Product is thoroughly inspected and tested before leaving the factory. Subject to thefollowing terms and conditions,
the Product (Tool, Battery, Charger) is warranty against defective materials and manufacturing defects for a period of
twelve (12) months from the date of purchase (applicable for purchases made from 1st October 2017 onwards) as evidenced from the sale or tax
invoice (with tool serial number) and Makita Authorised Service Centre or Makita Service Centre undertakes, at our option, to repair or replace, free of charge.

Conditions of warranty
This warranty will NOT cover or shall be null & void in any of the following events even during the warranty period:-

1. Damage resulting from normal wear and tear (Carbon brush/ holder/ cap, switch, gear, grinding/ cutting wheels, bits, saw blades, etc.,)

2. Damage resulting from use of improper accessories, non genuine replacement parts, disassembly, tampering, alteration and repairing in
any way that affects its performance.

3. Damage resulting from negligence, accident, disaster, improper storage or maintenance, abuse and misuse in evident caused by overloading the
tool beyond its capacity.

4. Abnormal voltage or the usage of generator, wrong usage not in accordance with the Operating Manual.

5. If the serial number on the tool, seal on the battery and charger has been defaced or removed.

6. If the receipt or invoice that display the date of purchase could not be present.