Protools Hardware Sdn Bhd
(1237320-V)
135, Jalan Ekoperniagaan 5, Taman Ekoperniagaan 2, Senai Airport City, 81400 Senai, Johor, Malaysia.
+607-552 0705
TD0101F MAKITA IMPACT DRIVER | *PRICE & STOCK ON REQUEST*
|
TD0101F MAKITA IMPACT DRIVER
FEATURES
-
Slim and durable aluminium hammer case
-
Compact design for perfect handling
-
Externally accessible carbon brush
-
No harm to the wrist when a screw is seated
-
Enables to drive screws even without pre-drilling pilot holes
SPECIFICATION
Continuous Rating Input: 230 W
Capacity
Machine Screw: M4 - M8 (5/32 - 5/16'')
Standard Bolt: M5 - M14 (3/16 - 9/16'')
High Tensile Bolt: M5 - M10 (3/16 - 3/8'')
Coarse Thread (in length): 22 - 90 mm (7/8 - 3-1/2'')
Driving Shank (Hex): 6.35 mm (1/4'')
Impacts Per Minute (IPM): 0 - 3,200
Max Fastening Torque: 100 N·m (74 ft lbs)
No Load Speed (RPM): 0 - 3,600
Dimensions (L x W x H): 184 x 67 x 192 mm (7-1/4'' x 2-5/8'' x 7-9/16'')
Net Weight: 0.99 kg (2.2 lbs)
Power Supply Cord: 2.5 m (8.2 ft)
NOTE
* Items of standard equipment and specifications may vary by country or area.
Net weight and dimensions may differ depending on the type of battery(ies) used.
All pictures shown are for illustration purpose only. Continuous Usage Time/ Work Amount: Actual performance may vary based on application.
WARRANTY
Every Makita Product is thoroughly inspected and tested before leaving the factory. Subject to thefollowing terms and conditions,
the Product (Tool, Battery, Charger) is warranty against defective materials and manufacturing defects for a period of
twelve (12) months from the date of purchase (applicable for purchases made from 1st October 2017 onwards) as evidenced from the sale or tax
invoice (with tool serial number) and Makita Authorised Service Centre or Makita Service Centre undertakes, at our option, to repair or replace, free of charge.
Conditions of warranty
This warranty will NOT cover or shall be null & void in any of the following events even during the warranty period:-
1. Damage resulting from normal wear and tear (Carbon brush/ holder/ cap, switch, gear, grinding/ cutting wheels, bits, saw blades, etc.,)
2. Damage resulting from use of improper accessories, non genuine replacement parts, disassembly, tampering, alteration and repairing in
any way that affects its performance.
3. Damage resulting from negligence, accident, disaster, improper storage or maintenance, abuse and misuse in evident caused by overloading the
tool beyond its capacity.
4. Abnormal voltage or the usage of generator, wrong usage not in accordance with the Operating Manual.
5. If the serial number on the tool, seal on the battery and charger has been defaced or removed.
6. If the receipt or invoice that display the date of purchase could not be present.
.png)
.png)
