Aluminium Housing Body The internal double-insulation construction with an aluminium die-cast body and a plastic stator holder Incorporating the internal double-insulation construction with a plastic stator holder and an aluminium die-cast body which firmly holds the armature shaft, the durability of the motor and the tool body has remarkably improved. Carbon brush rotation system extends carbon brush lifetime The position of carbon brushes on a brush holder is shifted according to the rotation direction. This reduces commutation sparks that cause brushes to wear out, resulting in approximately twice the lifetime of carbon brushes compared to the previous model DV20VB2. Powerful motor provides improved overload durability Overload durability: Comparisons of the torques when the motors burn out, based on the durability index of the previous model taken as 100. (The values are for reference purposes. They vary according to conditions.) Slip clutch * causes the gears between the motor and drill bit to slip when an excessive load is suddenly applied, resulting in less reaction force. The DV20VD may not be equipped with a slip clutch by areas. Userfriendly slide-type mode change lever Useful high/low gear shift dial No load speed Low 0 - 1,100 / min High 0 - 3,000 / min No load impact rate Low 0 - 14,300 / min High 0 - 39,000 / min Double-molded side handle Soft and easy to grip for comfortable operation Soft grip handle For more comfort and control. Specifications Model DV20VD DV22V Drill Chuck 1.5 - 13mm (1/16 - 1/2'') Capacity Concrete Hi : 13mm (1/2'') / Lo : 20mm (3/4'') Hi : 13mm (1/2'') / Lo : 22mm (7/8'') Steel Hi : 8mm (5/16'') / Lo : 13mm (1/2'') Hi : 8mm (5/16'') / Lo : 16mm (5/8'') Wood Hi : 25mm (1'') / Lo : 40mm (1 - 9/16'') Power Input 860W 1,120W No Load Speed Hi : 0 - 3,000/min / Lo : 0 - 1,100/min Full Load Impact Rate Hi : 22,000/min / Lo : 8,100/min Overall Length Keyed Chuck 365mm (14 - 3/8'') Keyless Chuck 363mm (14 - 9/32'') Weight *1 3.0 kg (6.6 lbs.) Vibration Total Values (triax vector sum) *2 Impact drilling into concrete Vibration emission value ah, ID = 16.6m/s2 Uncertainty K = 1.5 m/s2 Vibration emission value : ah, ID = 19.5m/s2 Uncertainty K = 1.5 m/s2 Drilling into metal Vibration emission value ah, D = 2.9m/s2 Uncertainty K = 1.5 m/s2 Vibration emission value ah, D = 3.3m/s2 Uncertainty K = 1.5 m/s2 Standard Accessories Chuck Wrench (Spec. only for keyed chuck) , Side Handle , Depth Gauge , Carrying Case According to EPTA-Procedure 01/2003. Vibration total values (triax vector sum) determined according to EN60745. Note: Manufacturer reserves the right to change specifications of parts and accessories without notice. Specifications and standard accessories may vary from country to country. Please contact local dealers for product availability and product details. read more

STANLEY HEX KEY SET | ALLEN KEY SET | 69-251, 69-252, 69-253, 69-254,69-256, 69-257 read more

read more

read more

The COOLMAN® T88 Continuous Turbo Rim Blade is ideally used for cutting a wide range of materials for general use such as cured concrete, bricks, stone, and granite. It can be used on right angle grinders and tiles saw.   PRODUCT SPECIFICATION APPLICATION MATERIAL Burnt Clay Brick, Cured Concrete, Harden Roof Tile, Paver, Reinforcement Concrete, Roof Tile   DIAMETER 105mm, 4 Inch   CHARACTERISE Fast-Cut, Safety and Stability   WELDING TECHNOLOGY Sintered Coldpress   CORE INGREDIENT Synthetic Diamond   BOND DESIGN Continuous Turbo Rim   SEGMENT HEIGHT 10mm   SEGMENT WIDTH 2mm   MAX. CUT DEPTH 1 inch, 25.4mm   MIN. OPERATION SPEED 9,072rpm   MAX. OPERATION SPEED 15,000rpm   BORE DIAMETER 16mm, 20mm read more

Product Description*FOR 1/2'' DRIVE TYPE SOCKET*72 TEETH* HEAVY DUTY* FULL POLISHED METAL HANDLE#RATCHET #WRENCHCOMPANY BACKGROUNDROBINSON tools is a global manufacturer of hand tools, hardware products for professional industrial, consumer and home improvement use our commitment to professionals goes well beyond providing a comprehensive line of world-class, professional grade, industry specific products.  read more