STST1-70718 STANLEY 12'' OPEN TOOL BAG Open Design: Allows clear visibility and instant reach to your most-used hand tools. Storage Organization: Includes vertical internal pockets, loops, and a small organizer compartment for drill bits and fasteners. Durable Build: Made from heavy-duty 600-denier polyester fabric designed to resist daily wear and tear. Portability: Fitted with a strong, adjustable shoulder strap and a rubberized carry handle. read more

DCP580N-XJ DEWALT 20V CORDLESS BRUSHLESS PLANER (BARE UNIT) Brushless Motor: Provides higher efficiency, longer runtime, and less wear. Kickstand (Foot Lock-Off): Rests the tool above the work surface to protect the blade and material when not in use. On-Board Storage: Stores replacement TCT reversible blades and the Torx key for quick changes. Dust Extraction: Compatible with the DeWalt AirLock system for clean operation. SPECIFICATIONS Voltage: 20 V Battery Chemistry: Li-Ion No Load Speed: 0–15,000 RPM Max Planing Depth: 2 mm Max Planing Width: 82 mm Weight Without Battery: 2.5 kg Battery Type: Bare Tool WARRANTY General terms and Conditions 1. The DEWALT PT 3 years Warranty is available to the original DEWALT product user who has purchased the DEWALT products from an authorized DEWALT reseller for use in the course of their trade or profession. The DEWALT PT Warranty is not available to persons purchasing DEWALT product for the purpose of “resale” or “hire”. 2. This warranty is not transferrable. It is only available to the original DEWALT product user who has purchased and registered the product as identified above. 3. In addition to the Terms & Conditions outlined in this document, the Terms & Conditions stated in the DEWALT PT Warranty also apply. 4. A product repair or replacement under this warranty does not extend or renew the warranty period. The 3 years warranty period starts from the original purchase date and ends 36 months later. Products excluded from the DEWALT (PT) 3 years Warranty. In addition to the product exclusions stated in the DEWALT PT Warranty,section 3, the following DEWALT branded products are also excluded: - Attachments and accessories. e.g. Nailers, Powder Impact tools - Batteries and Chargers - The product has been purchased as used or second hand - Break down due to usage of ingenuine spare parts, eg. carbon brush (not DEWALT spare parts). - Normal wear and tear parts: e.g. carbon brush, cord, plug, chuck and bearing. - Unauthorized repair, alteration/modification. - Damage caused by foreign objects, substances, accidents, obvious misuse, abuse, neglect and improper applications. - Failure or damage due to wear & tear of a component incurred during the course of normal use. Wear and tear components include but are not limited to the following examples. Under the DEWALT (PT) 3 years Warranty: - Armature, field coil, motor and electronic will be replaced at no cost for up to 3 times within the 3-years warranty period, if found to be manufacturing defect - Transmission and gearbox: - Cordless -Transmission – 1 time within the 3-years warranty period. - Corded - Gearbox – 1 time within the 3-years warranty period. Making a Warranty Claim 1. To make a warranty claim contact your seller or check the location of your nearest DEWALT authorized service center at https://asia.dewalt.global/. 2. The DEWALT Tool must be returned to the seller or an authorized service center with all parts complete, with the original proof of purchase. 3. DEWALT reserves the right to refuse any claim under this warranty which in the opinion of the authorized service center is not due to material or manufacturing defect or in accordance with the stated DEWALT PT Warranty Terms & Conditions. Changes to Terms & Conditions 1. DEWALT reserves the right to review and amend its warranty policies, periods and product eligibility without notice as DEWALT considers appropriate. 2. Current DEWALT PT Warranty Terms & Conditions are available from https://asia.dewalt.global/, your local DEWALT seller or DEWALT office. *** DEWALT POWER TOOL (PT) 3 years WARRANTY are not applicable to renting or fleet business. read more

DCF805D2A-B1 DEWALT 12V CORDLESS IMPACT DRIVER WITH 18 SET ACCESSORY SPECIFICATIONS Voltage: 12 V Battery Chemistry: Li-Ion No Load Speed: 0–2450 RPM Impact Rate: 0–2450 IPM Max Torque: 107 Nm Tool Holder: 6.35 mm (1/4'') Weight Without Battery: 1 kg Battery Type: 2 × 2Ah Battery WARRANTY General terms and Conditions 1. The DEWALT PT 3 years Warranty is available to the original DEWALT product user who has purchased the DEWALT products from an authorized DEWALT reseller for use in the course of their trade or profession. The DEWALT PT Warranty is not available to persons purchasing DEWALT product for the purpose of “resale” or “hire”. 2. This warranty is not transferrable. It is only available to the original DEWALT product user who has purchased and registered the product as identified above. 3. In addition to the Terms & Conditions outlined in this document, the Terms & Conditions stated in the DEWALT PT Warranty also apply. 4. A product repair or replacement under this warranty does not extend or renew the warranty period. The 3 years warranty period starts from the original purchase date and ends 36 months later. Products excluded from the DEWALT (PT) 3 years Warranty. In addition to the product exclusions stated in the DEWALT PT Warranty,section 3, the following DEWALT branded products are also excluded: - Attachments and accessories. e.g. Nailers, Powder Impact tools - Batteries and Chargers - The product has been purchased as used or second hand - Break down due to usage of ingenuine spare parts, eg. carbon brush (not DEWALT spare parts). - Normal wear and tear parts: e.g. carbon brush, cord, plug, chuck and bearing. - Unauthorized repair, alteration/modification. - Damage caused by foreign objects, substances, accidents, obvious misuse, abuse, neglect and improper applications. - Failure or damage due to wear & tear of a component incurred during the course of normal use. Wear and tear components include but are not limited to the following examples. Under the DEWALT (PT) 3 years Warranty: - Armature, field coil, motor and electronic will be replaced at no cost for up to 3 times within the 3-years warranty period, if found to be manufacturing defect - Transmission and gearbox: - Cordless -Transmission – 1 time within the 3-years warranty period. - Corded - Gearbox – 1 time within the 3-years warranty period. Making a Warranty Claim 1. To make a warranty claim contact your seller or check the location of your nearest DEWALT authorized service center at https://asia.dewalt.global/. 2. The DEWALT Tool must be returned to the seller or an authorized service center with all parts complete, with the original proof of purchase. 3. DEWALT reserves the right to refuse any claim under this warranty which in the opinion of the authorized service center is not due to material or manufacturing defect or in accordance with the stated DEWALT PT Warranty Terms & Conditions. Changes to Terms & Conditions 1. DEWALT reserves the right to review and amend its warranty policies, periods and product eligibility without notice as DEWALT considers appropriate. 2. Current DEWALT PT Warranty Terms & Conditions are available from https://asia.dewalt.global/, your local DEWALT seller or DEWALT office. *** DEWALT POWER TOOL (PT) 3 years WARRANTY are not applicable to renting or fleet business. read more

DCD700D2-B1 DEWALT 12V CORDLESS COMPACT DRILL DRIVER SPECIFICATIONS Voltage: 12 V Battery Chemistry: Li-Ion No Load Speed: 0–1500 RPM Max Torque: 24 Nm Chuck Capacity: 10 mm Max Drilling Capacity in Wood: 20 mm Max Drilling Capacity in Metal: 10 mm Weight Without Battery: 1 kg Battery Type: 2 × 2Ah Battery WARRANTY General terms and Conditions 1. The DEWALT PT 3 years Warranty is available to the original DEWALT product user who has purchased the DEWALT products from an authorized DEWALT reseller for use in the course of their trade or profession. The DEWALT PT Warranty is not available to persons purchasing DEWALT product for the purpose of “resale” or “hire”. 2. This warranty is not transferrable. It is only available to the original DEWALT product user who has purchased and registered the product as identified above. 3. In addition to the Terms & Conditions outlined in this document, the Terms & Conditions stated in the DEWALT PT Warranty also apply. 4. A product repair or replacement under this warranty does not extend or renew the warranty period. The 3 years warranty period starts from the original purchase date and ends 36 months later. Products excluded from the DEWALT (PT) 3 years Warranty. In addition to the product exclusions stated in the DEWALT PT Warranty,section 3, the following DEWALT branded products are also excluded: - Attachments and accessories. e.g. Nailers, Powder Impact tools - Batteries and Chargers - The product has been purchased as used or second hand - Break down due to usage of ingenuine spare parts, eg. carbon brush (not DEWALT spare parts). - Normal wear and tear parts: e.g. carbon brush, cord, plug, chuck and bearing. - Unauthorized repair, alteration/modification. - Damage caused by foreign objects, substances, accidents, obvious misuse, abuse, neglect and improper applications. - Failure or damage due to wear & tear of a component incurred during the course of normal use. Wear and tear components include but are not limited to the following examples. Under the DEWALT (PT) 3 years Warranty: - Armature, field coil, motor and electronic will be replaced at no cost for up to 3 times within the 3-years warranty period, if found to be manufacturing defect - Transmission and gearbox: - Cordless -Transmission – 1 time within the 3-years warranty period. - Corded - Gearbox – 1 time within the 3-years warranty period. Making a Warranty Claim 1. To make a warranty claim contact your seller or check the location of your nearest DEWALT authorized service center at https://asia.dewalt.global/. 2. The DEWALT Tool must be returned to the seller or an authorized service center with all parts complete, with the original proof of purchase. 3. DEWALT reserves the right to refuse any claim under this warranty which in the opinion of the authorized service center is not due to material or manufacturing defect or in accordance with the stated DEWALT PT Warranty Terms & Conditions. Changes to Terms & Conditions 1. DEWALT reserves the right to review and amend its warranty policies, periods and product eligibility without notice as DEWALT considers appropriate. 2. Current DEWALT PT Warranty Terms & Conditions are available from https://asia.dewalt.global/, your local DEWALT seller or DEWALT office. *** DEWALT POWER TOOL (PT) 3 years WARRANTY are not applicable to renting or fleet business. read more

DW802-B1 DEWALT (4'') 100MM 850W SLIDE SWITCH ANGLE GRINDER Compact Gear Case: Designed for working in tight and confined spaces. Sealed Switch: Protected against dust and metal filings to extend switch life. Adjustable Guard: Tool-free guard that adjusts easily for left or right-handed users. Advanced Fan System: Maximizes airflow to cool and prolong motor life. SPECIFICATIONS Power Input: 850 W Disc Diameter: 4 inches / 100 mm No-Load Speed: 11,000 RPM Switch Type: Slide (Toggle) Spindle Thread: M10 Weight: 1.8 kg WARRANTY General terms and Conditions 1. The DEWALT PT 3 years Warranty is available to the original DEWALT product user who has purchased the DEWALT products from an authorized DEWALT reseller for use in the course of their trade or profession. The DEWALT PT Warranty is not available to persons purchasing DEWALT product for the purpose of “resale” or “hire”. 2. This warranty is not transferrable. It is only available to the original DEWALT product user who has purchased and registered the product as identified above. 3. In addition to the Terms & Conditions outlined in this document, the Terms & Conditions stated in the DEWALT PT Warranty also apply. 4. A product repair or replacement under this warranty does not extend or renew the warranty period. The 3 years warranty period starts from the original purchase date and ends 36 months later. Products excluded from the DEWALT (PT) 3 years Warranty. In addition to the product exclusions stated in the DEWALT PT Warranty,section 3, the following DEWALT branded products are also excluded: - Attachments and accessories. e.g. Nailers, Powder Impact tools - Batteries and Chargers - The product has been purchased as used or second hand - Break down due to usage of ingenuine spare parts, eg. carbon brush (not DEWALT spare parts). - Normal wear and tear parts: e.g. carbon brush, cord, plug, chuck and bearing. - Unauthorized repair, alteration/modification. - Damage caused by foreign objects, substances, accidents, obvious misuse, abuse, neglect and improper applications. - Failure or damage due to wear & tear of a component incurred during the course of normal use. Wear and tear components include but are not limited to the following examples. Under the DEWALT (PT) 3 years Warranty: - Armature, field coil, motor and electronic will be replaced at no cost for up to 3 times within the 3-years warranty period, if found to be manufacturing defect - Transmission and gearbox: - Cordless -Transmission – 1 time within the 3-years warranty period. - Corded - Gearbox – 1 time within the 3-years warranty period. Making a Warranty Claim 1. To make a warranty claim contact your seller or check the location of your nearest DEWALT authorized service center at https://asia.dewalt.global/. 2. The DEWALT Tool must be returned to the seller or an authorized service center with all parts complete, with the original proof of purchase. 3. DEWALT reserves the right to refuse any claim under this warranty which in the opinion of the authorized service center is not due to material or manufacturing defect or in accordance with the stated DEWALT PT Warranty Terms & Conditions. Changes to Terms & Conditions 1. DEWALT reserves the right to review and amend its warranty policies, periods and product eligibility without notice as DEWALT considers appropriate. 2. Current DEWALT PT Warranty Terms & Conditions are available from https://asia.dewalt.global/, your local DEWALT seller or DEWALT office. *** DEWALT POWER TOOL (PT) 3 years WARRANTY are not applicable to renting or fleet business. read more

DWD014-XD 10mm 550W ROTARY DRILL Variable Speed Switch: Allows slow, precise starting speeds. Lock-On Button: Keeps the tool running during repetitive tasks. Compact Design: Built for one-handed operation and tight spaces SPECIFICATIONS Power Input: 550 W Chuck Capacity: 10 mm (3/8'') No-Load Speed: 0 – 2,800 RPM Max Drilling Capacity (Wood): 25 mm Max Drilling Capacity (Metal): 10 mm Weight: ~1.3 kg WARRANTY General terms and Conditions 1. The DEWALT PT 3 years Warranty is available to the original DEWALT product user who has purchased the DEWALT products from an authorized DEWALT reseller for use in the course of their trade or profession. The DEWALT PT Warranty is not available to persons purchasing DEWALT product for the purpose of “resale” or “hire”. 2. This warranty is not transferrable. It is only available to the original DEWALT product user who has purchased and registered the product as identified above. 3. In addition to the Terms & Conditions outlined in this document, the Terms & Conditions stated in the DEWALT PT Warranty also apply. 4. A product repair or replacement under this warranty does not extend or renew the warranty period. The 3 years warranty period starts from the original purchase date and ends 36 months later. Products excluded from the DEWALT (PT) 3 years Warranty. In addition to the product exclusions stated in the DEWALT PT Warranty,section 3, the following DEWALT branded products are also excluded: - Attachments and accessories. e.g. Nailers, Powder Impact tools - Batteries and Chargers - The product has been purchased as used or second hand - Break down due to usage of ingenuine spare parts, eg. carbon brush (not DEWALT spare parts). - Normal wear and tear parts: e.g. carbon brush, cord, plug, chuck and bearing. - Unauthorized repair, alteration/modification. - Damage caused by foreign objects, substances, accidents, obvious misuse, abuse, neglect and improper applications. - Failure or damage due to wear & tear of a component incurred during the course of normal use. Wear and tear components include but are not limited to the following examples. Under the DEWALT (PT) 3 years Warranty: - Armature, field coil, motor and electronic will be replaced at no cost for up to 3 times within the 3-years warranty period, if found to be manufacturing defect - Transmission and gearbox: - Cordless -Transmission – 1 time within the 3-years warranty period. - Corded - Gearbox – 1 time within the 3-years warranty period. Making a Warranty Claim 1. To make a warranty claim contact your seller or check the location of your nearest DEWALT authorized service center at https://asia.dewalt.global/. 2. The DEWALT Tool must be returned to the seller or an authorized service center with all parts complete, with the original proof of purchase. 3. DEWALT reserves the right to refuse any claim under this warranty which in the opinion of the authorized service center is not due to material or manufacturing defect or in accordance with the stated DEWALT PT Warranty Terms & Conditions. Changes to Terms & Conditions 1. DEWALT reserves the right to review and amend its warranty policies, periods and product eligibility without notice as DEWALT considers appropriate. 2. Current DEWALT PT Warranty Terms & Conditions are available from https://asia.dewalt.global/, your local DEWALT seller or DEWALT office. *** DEWALT POWER TOOL (PT) 3 years WARRANTY are not applicable to renting or fleet business. read more

Specifications Pack quantity: 1 piece Blade length: 5″ / 127 mm Overall length: 9″ / 229 mm Width: 4″ / 101.6 mm Height: 0.65″ / 16.5 mm Cutting material: Coarse carbide grit Compatible tools: SAWZALL® & HACKZALL™ reciprocating saws Suitable for: Epoxy and cement-based grout Grout range: 1/8″ to 3/4″ Features Coarse carbide grit for fast grout removal Curved cutting edge for improved accuracy Corrosion-resistant coating Fits compatible SAWZALL® and HACKZALL™ reciprocating saws Designed specifically for grout-removal applications. Quality Durable carbide-grit cutting surface Corrosion-resistant construction Designed for repeated material-removal work Curved edge supports controlled grout removal. Benefits Helps remove old grout efficiently Suitable for both epoxy and cement-based grout Useful for tile renovation and maintenance Compatible with common Milwaukee reciprocating-saw platforms Single-piece item is easy to organise for inventory.  read more